|
Sidearm
Mounted on the bottom of the center column, the sidearm is designed to securely support
your tripod head for low angle camera positions. The head mount can be moved easily
to any position along the 18" horizontal arm. Height may be adjusted by raising and
lowering the center column on 6500 series tripods. May be used at the lowest position
only on 7500 series tripods.
MAJESTIC 8040 SIDE ARM |
|
 |
Caster Sets
Make you Majestic tripod mobile with the addition of our caster sets. Ball bearing swivels
provide unrestricted movement. Wheel locks on 3" sets makes sure your tripod stays
just where you want it. Designed to fit Majestic 6500 and 7500 series tripods without
extension legs.
MAJESTIC 8202 CASTER SET - 2"
MAJESTIC 8203 CASTER SET - 3"
MAJESTIC 8204 CASTER SET - 4" |
|
 |
Gearhead Platforms
Solid aluminum platforms, to accommodate a wide selection of cameras are easily
interchanged with just a screwdriver. For use on 1000, 1200 and 1900 series gearheads.
Order platform screw separately.
MAJESTIC 501 GEARHEAD PLATFORM - 6" x 7"
MAJESTIC 503 GEARHEAD PLATFORM - 6 x 4-1/2"
MAJESTIC 505 GEARHEAD PLATFORM - 3" x 3-3/4"
MAJESTIC 507 GEARHEAD PLATFORM - 4-1/2" round |
|
 |
Gearhead Platform Screws
Spring loaded camera platform screws are available in both 1/4-20 and 3/18-16 thread.
Platform screws will fit Majestic 501 through 507 gearhead platforms only.
MAJESTIC 550 GEARHEAD PLATFORM SCREW - 1/4-20
MAJESTIC 555 GEARHEAD PLATFORM SCREW - 3/8-16 |
|
 |
Gearhead Swing Platform
Designed for medium format film or digital cameras to quicky position in either horizontal
or vertical format. Camera easily rotates to positive stops without the use of
cumbersome levers or knobs. Adjustable camera plate positions the lens axis over the
center of the gearhead in either position. For use on 1000, 1200 and 1900 series
gearheads. 3.9" H x 5.5" W x 3.4" D. Camera Plate Adjustment (For optical center
adjustment) 1.8" to 2.4".
MAJESTIC 510 SWING PLATFORM
more information... |
|
 |
Tripod Adapters
Adapters for 3/8" screw mount tripods to accept 1200 series or 1900 series gearheads
Features locking screw for attachment to any screw mount tripod
 MAJESTIC 800 ADAPTER - 1-1/2"
MAJESTIC 802 ADAPTER - 1-7/8"
Designed for Majestic 8000 series tripod
MAJESTIC 810 ADAPTER - 1-1/2"
MAJESTIC 812 ADAPTER - 1-7/8"
|
|
